Applications

1. Infra Red Sensors

Leakage Sensor

Image:

Leakage_Sensor.jpg

Description :

Leakage Sensor details attached

2. Customized Special Displays

BCD Display

Image:

BCD_Display-page-001.jpg

Description :

This type of display are specifically used by system integrators  and Panel Builders.

Flow Rate Totalizer

Image:

Duel_Display_6-41.jpg

Description :

Electronic Switches (I) P. Ltd; offers Flow rate totaliser with 19 mm height seven segment LED display. 6 Digit for Flow Totaliser and 4 digit for flow rate. 

Units operates on 220 Volts AC supply and accepts input Pulses from turbine flow sensor. Flow rate will display in unit / Minute. Flow Totaliser will displays in unit. 

 

It is used Flow measurement and where turbine sensors are available. 

Press Machine Controller

Image:

Machine_Controller-page-001.jpg

Description :

Press Machine Controller

RPM Indicator with Digital/ Analog output

Image:

RC_421.jpg

Description :

Electronic Switches (I) P. Ltd; offers 4 Digits, RPM Indicator with 19 mm height seven segment LED display.

These are used mainly by Automobile industry and their R&D Centers.

Units operates on 12 Volts DC supply This counter is used for directly displays analog / Digital output Electronic Switches offers RPM Indicator with 1) Analog Output 2)Digital Output. 

Tension control Winding/Unwinding Application

Image:

Tension_Control_Counter-page-001.jpg

Description :

Model : LSLC 262 - A010 

 

Application : Textile, Rubber, Wire , paper, Plastic processing Industries. 

 

 

Flame Proof Display

Image:

WP_20150714_001.jpg

Description :

Electronic Switches offers flame proof displays for hazardous application. These are used for Automobile, Foundry applications where these display are used in hazardous area. Inputs like pulsed, analog inputs like 0-10 V DC , 4-20 mA can be displayed on them.

Utility Cockpit Display

Image:

Cockpit_display.jpg

Description :

Electronic Switches custmomized display for Automototive Industry where multiple paramaters are displayed. These displays are used where multiple paramaters has to shown and controlled on a single big display. 3 stack Tower lamps are also provided for indication purposes. Paramaters like Temperature, Air Pressure, Humidity, Water Pressure, Water Flow rate can be shown on these dispays

Peak Hold + Pressure Burst Display for Valve Testing Machines

Image:

96_x_96.jpg

Description :

Electronic Switches offers specialized display for Valve testing mahine manufacturers. The display accepts 4-20 mA input from the pressure transmitters It holds and indicates only the maximum pressure value on 7 segment display. This display used to detect at how much pressure the valve can sustain pressure and burst at peak value.

3. Applications using Light Curtains

Light Curtains used for controlling Spray Guns in Automatic Painting Booths

Image:

portfolio-10.jpg

Description :

Light Curtain is also used for controlling and operating spray guns as per the height of object being painted in a paint booth. These objects move on a conveyer belt inside the painting booths. Height of object is sensed by a light Curtain and corresponding spray guns which are in front of object, are operated to paint the object.  In this case only those guns are operated which are covering the object which saves lots of paint. Light Curtain offers output for inpisual sensors in binary form to control spray guns.

Pick-to-Light

Image:

Pick_to_Light-page-001.jpg

Description :

For Assembly Line application

Vehicle height detection at Toll Boths

Image:

images.jpg

Description :

Electronic Switches offers height sensors with inpidual beam output or with analog output for toll boths application. Here, the vehicle height is detected by the light curtains and depending upon the height of the vehicle output is given to the controller. And automatically, the person/ vehicle receives payment receipt.

4. Level Sensors Applications

Pump Guard Controller for Water Tanks

Image:

portfolio-5.jpg

Description :

Electro Arts  offers Float level sensors for overhead tanks. These are used for liquids like water, oil. Pump guard controller is offered for controlling the liquid levels on multiple tanks. Controller is used to avoid overflow of the liquids from the tanks.

Magnetic Float Level for Fire-Fighting Vehicles

Image:

portfolio-51.jpg

Description :

We offer water level sensor and multiple level indicator for fire fighting vehicles. LED indications are provided for level indicator. The indicator will be placed near to the driver seat. RPM Indicators are also used by the Fire fighter manufacturers.

5. Applications/Products For Automotive Industry

Wireless Tork Wrench for Automotive Assembly Line

Image:

download.jpg

Description :

When vehicle arrives, it is sensor by sensor. (price for sensor not included)  After arrival of vehicle , operator check nuts with torque wrench. Contact is provided from your torque wrench when predefined torque is reached. When input received from torque wrench, sensor send data to receiver unit through RF link.

 

Microcontroller based pokayoke has facility to preset no. of nuts to be checked. If vehicle moves before required number of input received through RF link, the pokayoke will give alarm and also additional output for intrelink to PLC  

 

 

Military Connector RPM Indicator

Image:

ENGINE_RPM_INDICATOR-page-001.jpg

Description :

RPM Indicator with Ananlog / Digital Output with Military Connector

6. Products for Chemical/ Pharma Industry

Pass Box Control System

Image:

Pass_box_system-page-001.jpg

Description :

Pass Box Contro System

7. Products for Foundry Applications

Moulding Sand Level Controller

Image:

Molding_Sand_Level_Controller_(1).jpg

Description :

Moulding Sand Level Controller

Orange Bulb Sensing

Image:

Flame_Sensor.jpg

Description :

Electronic Switches offers model LBS 183 for foundry application. This sensor is used to sense orange/ yellow color bulb in a foundry panel. When it glows in the dark area inside a foundry and the sensor senses the yellow/ orange color and gives output. This output is give to a big tower lamp for indication purposes.

8. Data Logging Application

SD Card Data Logger

Image:

Data_Logging_Display.jpg

Description :

SD Card Datalogger

9. Products for Packaging Applications

Label Sensor

Image:

Label_Sensor_(2)-page-001.jpg

Description :

Used for Packaging and Labelling Application. Highly acurate product with teach facility.

Analog Proximity Sensor

Image:

Analog_Proximity-page-001.jpg

Description :

Analog Proximity Sensor used for Packaging Applications.

10. Displays with Modbus / RS-485 Serial Communication

Modbus Display

Image:

MODBUS_-_BIG_DISPLAY-page-0011.jpg

Description :

Modus Display

11. Building Automation Devices

Laundry Chute System Controller

Image:

laundry.jpg

Description :

Electronic Switches offers Controller for laundry chute system controller for appartments and Hotels. Laundry Chute systems are the new technology developed for appartments to collect the laundry from all the floors. Our controller is designed such that it will allow only one door (at each floor) to open and rest of the floor doors are closed. There will be a lock which will be password protected and only desired person could access.

Garbage Chute Controller- RS485 communication

Image:

garbage.jpg

Description :

Electronic Switches offers garbage chute controller specially hotels , big appartments, complexes. It is similar to laundry chute controller. At a time only one floor person is allowed to put the garbage in the chute and all other windows are closed. The advantage of these system is all the controller on every floor are connected with 2 cables using RS485 serial communication.

12. CONVERTER

INPUT 4 - 20mA to RS 485

Image:

RC_42.JPG

Description :

Electronic switches provided converter for input 4 - 20mA  to RS 485. We can offer converter in digital display type

Dimension for the display is 48 x 96 x 110mm

 

 

 

 

13. Products for Cement Application

Belt Rupture/ Tear Switch

Image:

Light_Curtain_-_21.jpg

Description :

Electronic Switches offers new generation Belt Rupture/Rip switch which is based on advanced micro controller technology. Belt rupture Switch consist of controller and optical transmitter and receiver for sensing. Sensor to be mounted below the belt of the conveyor. If the belt is ruptured or ripped then the conveying material will fall in the sensing area of the sensor and it will sense the falling material and the controller will trip the belt conveyor.

Belt-Sway Safety Switch

Image:

belt-sway-switch9.jpg

Description :

Electronic Switches offers Belt Sway switch for Cement Applications

These Switches are designed for Man and Machine Safety, to avoid accidents, and for stopping the Machine in case of Emergency.In Belt Conveyors, belt swaying occurs due to uneven loading, misalignment of the idlers & due to worn surfaces. Belt Sway Switches are useful to restrict belt sway withinthe tolerable limits. Belt Sway Switch is mounted on both sides of belt conveyors preferably every 15 to 20 meters.

Pull Cord Switch

Image:

belt-sway-switch8.jpg

Description :

Electronic Switches offers Pull Cord switch for Cement Applications

These Switches are designed for Man and Machine Safety, to avoid accidents, and for stopping the Machine in case of Emergency.In Belt Conveyors, belt swaying occurs due to uneven loading, misalignment of the idlers & due to worn surfaces.

 

Pull Cord Switches are useful to restrict belt sway within the tolerable limits. Belt Sway Switch is mounted on both sides of belt conveyors preferably every 15 to 20 meters.