ANTI CRANE COLLISION SENSORS

ANTI CRANE COLLISION SENSORS

ANTI CRANE COLLISION - One Set Point

Model :     ACC 03/10/15 : Single Set Point

MODELS

Model    ACC 03   :  Range 03 Meters (max) / single set point
Model    ACC 10   :  Range 10 Meters (max) / single set point
Model    ACC 15   :  Range 15 Meters (max) / single set point

DETAILS

Electronic Switches (India) Pvt. Ltd. offers Anti Crane Collision Switch for two over head cranes on the same rail. These units are installed on two cranes on the same rail approaching each other. With these units, the two cranes on the same rail will never collide with each other & thus the damage caused due to collision can be saved. The minimum distance in between two cranes will always be maintained, and the cranes will be able to move away from each other but not closer

FEATURES

Unit has inbuilt Infra Red Transmitter & Receiver along with other processing circuit and power supply.  It works on 110 VAC and 220 V AC supply and offers potential free relay contacts. These contacts are interlocked with the contactor for direction of motion towards each other. Set consists of a control unit and a reflector. Control unit is fixed on one Crane and the reflector on the other crane opposite to the control unit. Same way another control unit should be fixed on second crane and it's reflector on first crane, opposite to each other. Make sure that both the control unit should not be placed opposite to each other. Alignment of both the units is necessary, as the rays transmitted by the Transmitter will be reflected back by the Reflector. A Laser Alignment Tool is provided for perfect alignment of control unit  and reflector. The reflected beam will be picked up by the receiver when both the cranes come closer.  When the two cranes come within the range, the moving crane will be stopped  immediately. This range can be adjusted for single set point, as required. For two set points, one can be adjusted to get an alarm at required distance and another can be set to stop the crane at required distance.

SPECIFICATIONS

Supply Voltage           :         230V AC / 110V AC ( User Selectable )
No of set points          :          Single
No of output / Relay  :          Relay output
Output                          :          Potential Free Relay Contacts
Contacts Rating         :          3 Amps ( max. ) at 220 V AC
Range Adjustment    :          Provided ( up to 50 % approx. )
Adjustment through  :           Pot provided
Reflector size             :           130 x 75 mm
Dimensions                :           180 mm X 145 mm X 55 mm  
Housing                      :           Metal Housing
 

APPLICATIONS

For Overhead cranes